TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 907 of 1008

TM 9-2350-261-20-2

ADJUST PIVOT STEER LINKAGE

0415 00

THIS WORK PACKAGE COVERS:

Adjustment (page 0415 00-1).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

FRH hydraulic fluid (WP 0782 00, Item 27)

Locknut (2)

Personnel Required

Unit Mechanic

References

WP 0120 00

Equipment Condition

Engine stopped/shutdown (see your -10)

Carrier blocked (see your -10)

Ramp lowered (see your -10)

Driver’s seat removed (WP 0478 00)

ADJUSTMENT

1.

Remove two locknuts (1), screws (2), and rod end bearings (3) from two control handles (4). Discard locknuts.

2.

Push two control handles (4) forward to full release position.

3.

Move two master cylinder clevises (5) until contact with master cylinder internal piston is made.

041500-1