TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 898 of 1008

TM 9-2350-261-20-2

REPLACE PIVOT STEER MASTER CYLINDERS AND HOSES — Continued

0412 00

INSTALLATION

1.

Install bellows (1) and clevis (2) in master cylinder (3).

2.

Place master cylinder (3) on support (4). Secure with three screws (5) and new locknuts (6).

3.

Install clevis (2) to levers and shaft (7). Secure with clevis pin (8) and new cotter pin (9).

4.

Install new preformed packing (10) and elbow (11) in master cylinder (3).

5.

Secure adapter (12), nut (13), and hose (14) to elbow (11).

6.

Connect hose (14) to bulkhead elbow (15).

7.

Bleed and fill pivot steer system (WP 0409 00). Install master cylinder filler cap (16).

FOLLOW-THROUGH STEPS

1.

Install driver’s seat (WP 0478 00).

2.

Start engine (see your -10). Check for hydraulic leaks.

3.

Raise and lock ramp (see your -10).

4.

Operate carrier to check that brake system operates properly.

5.

Stop/shutdown engine (see your -10).

END OF TASK

0412 00-2