TM-9-2350-261-20-2
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4
TM-9-2350-261-20-2 - Page 906 of 1008
TM 9-2350-261-20-2
REPLACE PIVOT STEER BRAKE DISK — Continued
0414 00
INSTALLATION
1.
Install new brake disk (3) and adapter (2) on differentialoutputshaft.Securewithfour new locknuts (1). TIGHTEN
NUTS TO 75-80 LB-FT (102-108 N·M) TORQUE. Use torque wrench.
FOLLOW-THROUGH STEPS
1.
Install drive shaft (WP 0348 00).
2.
In stall brake
s
(W P 0413 00).
END OF TASK
0414 00-2
Back to Top
