TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 893 of 1008

TM 9-2350-261-20-2

REPLACE PIVOT STEER BELLCRANKS AND BRACKETS

0411 00

THIS WORK PACKAGE COVERS:

Removal (page 0411 00-1).

Inspection-Acceptance and Rejection Criteria (page 0411 00-2).

Installation (page 0411 00-3).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Cotter pin (2)

Locknut (10)

Personnel Required

Unit Mechanic

References

WP 0415 00

Equipment Condition

Engine stopped/shutdown (see your -10)

Carrier blocked (see your -10)

Ramp lowered (see your -10)

Driver’s seat removed (WP 0478 00)

REMOVAL

1.

Remove two cotter pins (1) and clevis pins (2) that secure two master cylinders (3) to levers and shafts (4). Discard

cotter pins.

2.

Remove six screws (5). Pull two master cylinders (3) away from mount (6) as far as possible.

3.

Remove two screws (7), locknuts (8), and links (9) from levers and shafts (4). Discard locknuts.

041100-1