TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3

  TM-9-2350-261-20-3 - Page 125 of 932

TM 9-2350-261-20-3
REPAIR DRIVER’S HATCH (M901A1 ONLY)
0449 00
THIS WORK PACKAGE COVERS:
Removal (page 0449 00-1).
Disassembly (page 0449 00-5).
Cleaning (page 0449 00-9).
Inspection-Acceptance and Rejection Criteria (page 0449 00-9).
Repair or Replacement (page 0449 00-9).
Assembly (page 0449 00-11).
Installation (page 0449 00-14).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0780 00, Item 29)
Snap Ring Pliers (WP 0780 00, Item 45)
Socket Wrench Set (WP 0780 00, Item 97)
Torque Wrench (WP 0780 00, Item 100)
Torque Wrench (WP 0780 00, Item 102)
Torque Wrench (WP 0780 00, Item 105)
Torque Wrench (WP 0780 00, Item 104)
Materials/Parts
Adhesive sealant (WP 0782 00, Item 4)
Cleaning compound (WP 0782 00, Item 16)
Lubricating oil (WP 0782 00, Item 37)
Sealing compound (WP 0782 00, Item 62)
Cotter pin (2)
Cotter pin (2)
Locknut (2)
Locknut
Locknut (4)
Materials/Parts
Lockwasher (6)
Lockwasher (3)
Lockwasher (2)
Lockwasher
(3)
Rubber stop
Seal
Spring pin
Personnel Required
Unit Mechanic
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
REMOVAL
1.
Clean driver’s hatch areas with a stiff acid brush dampened with cleaning compound.
WARNING
Driver’s hatch cover could fall during vehicle operation because of worn or excessively soiled
components and/or maladjustment, causing injury or death. Follow inspection procedures
very carefully.
044900-1


Back to Top