TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 135 of 932

TM 9-2350-261-20-3

REPAIR DRIVER’S HATCH (M901A1 ONLY) — Continued

0449 00

ASSEMBLY

1.

Install link (1), spring (2), spring (3), pin (4), and new spring pin (5).

2.

Install washer (6), spacer (7), link (8), washer (9), washer (10), link (11), washer (12), washer (13), pin (14), and two

new cotter pins (15).

3.

Install shim (16), bracket (17), two washers (18), and screws (19).

4.

Install block (20), two pins (21), six washers (22), and screws (23) on support (24).

5.

Install pin (25), pin (26), block (27), and two screws (28).

NOTE

Shim is required to make sure linkage returns to over center position.

6.

Install bracket (29), two washers (30), washer (31), two pins (32), washer (33), two washers (34), and two new cotter

pins (35).

0449 00-11