TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 200 of 932
TM 9-2350-261-20-3
REPLACE MORTAR HATCH INTERIOR RELEASE MECHANISMS
(M1064 ONLY) — Continued
0466 00
ADJUSTMENT
1.
Position each bracket (6) on cover (7) to get 1/2 inch (13 mm) maximum distance from strike (1) to bracket with cover
closed.
2.
Install washer(s) (5) between each bracket (6) and cover (7) until tee head bolt (10) inserts into strike (1) 3/8-1/2 in
(10-13 mm) with cover closed.
3.
Tighten four screws (9).
FOLLOW-THROUGH STEPS
1.
Start engine (see your -10).
2.
Raise and lock ramp (see your -10).
3.
Stop engine (see your -10).
END OF TASK
0466 00-4
Back to Top
