TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 481 of 932

TM 9-2350-261-20-3

REPLACE LAUNCH TUBE STOWAGE BRACKET (M901A1 ONLY)

0550 00

THIS WORK PACKAGE COVERS:

Removal (page 0550 00-1).

Installation (page 0550 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Materials/Parts

Cotter pin

Lockwasher (10)

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

Launch tube removed (see your -10)

REMOVAL

1.

Remove cotter pin (1), headed straight pin (2), strap (3), and upper support (4). Remove strap. Discard cotter pin.

2.

Remove four nuts (5), lockwashers (6), washers (7), screws (8), and washers (9) from upper support (4) and bracket

(10). Remove support from bracket. Discard lockwashers.

3.

Remove two screws (11), lockwashers (12), and washers (13) from bracket (10) and hull (14). Remove bracket. Discard

lockwashers.

4.

Remove pin (15), four screws (16), and washers (17) from lower support (18) and plate (19). Remove lower support.

5.

Remove four screws (20), lockwashers (21), two spacers (22), and two spacers (23) from plate (19) and hull. Remove

plate. Discard lockwashers.

055000-1