TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 482 of 932

TM 9-2350-261-20-3

REPLACE LAUNCH TUBE STOWAGE BRACKET (M901A1 ONLY) — Continued

0550 00

INSTALLATION

1.

Install plate (19) on hull. Secure with two spacers (23), spacers (22), four new lockwashers (21), and screws (20).

2.

Install lower support (18) on plate (19). Secure with four washers (17), screws (16), and pin (15).

3.

Install bracket (10) on hull (14). Secure with two washers (13), new lockwashers (12), and screws (11).

4.

Install upper support (4) on bracket (10). Secure with four washers (9), washers (7), new lockwashers (6), screws (8),

and nuts (5).

5.

Install strap (3) on upper support (4). Secure with headed straight pin (2) and new cotter pin (1).

FOLLOW-THROUGH STEPS

1.

Install launch tube (see your -10).

END OF TASK

0550 00-2