TM-9-2350-261-20-3
CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4
TM-9-2350-261-20-3 - Page 604 of 932
TM 9-2350-261-20-3
REPLACE SMOKE GRENADE LAUNCHER WIRING HARNESS (M113A2,
M1059, AND M901A1 ONLY) — Continued
0577 00
12. Remove four locknuts (1), screws (2), washers (3), and harness connector (4) from driver’s compartment bulkhead.
Have helper assist. Discard locknuts.
13. Inspect plate (5) on bulkhead. If defective, remove four screws (6), washers (7), and locknuts (8). Discard locknuts.
14. Remove two screws (9), lockwashers (10), and clamps (11) from front hull inside driver’s compartment. Remove wiring
harness (12) and main wiring harness (13) from clamps. Discard lockwashers.
15. Remove screw (14), clamp (15), and main wiring harness clamp (16) from front hull. Remove wiring harness (12)
from clamp (15).
16. Remove cradle clip (17), wiring harness (12), and main wiring harness (13) from cradle (18) on front hull.
17. Remove four cradle clips (19), wiring harness (12), and main wiring harness (13) from four cradle (18).
0577 00-4
Back to Top
