TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 609 of 932

TM 9-2350-261-20-3

REPLACE SMOKE GRENADE LAUNCHER WIRING HARNESS (M113A2,

M1059, AND M901A1 ONLY) — Continued

0577 00

9.

Install wiring harness (12) and main wiring harness (13) in four cradles (18). Secure with four clips (17).

10. Install wiring harness (12) and main wiring harness (13) in cradle (18). Secure with clip (19).

11. Install clamp (12) on wiring harness (15). Secure clamp (15) and main wiring harness clamp (16) to hull with screw (14).

12

. Installtwoclamps(11)onwiringharness(12)andmainwiringharness(13). Secure clamps to hull with two screws (9)

and new lockwashers (10).

13. If removed, install plate (5) on bulkhead with four screws (6), washers (7), and new locknuts (8).

14. Secure harness connector (4) to bulkhead with four screws (2), washers (3), and new locknuts (1).

057700-9