TM 9-2350-261-20-3
REPLACE SMOKE GRENADE LAUNCHER WIRING HARNESS (M113A2,
M1059, AND M901A1 ONLY) — Continued
0577 00
8.
Remove screw (1), lockwasher (2), and clamp (3) (M901A1 only) from hull inside power plant compartment. Remove
wiring harness (4) from clamps. Discard lockwasher.
9.
Remove three screws (5), lockwashers (6), clamps (7), and heater harness clamps (8) from hull. Remove wiring harness
(4) from clamps (7). Discard lockwashers.
10. Remove three screws (9), lockwashers (10), clamps (11), and clamps (12) from hull and bulkhead. Remove clamps (11)
from wiring harness (4). Discard lockwashers.
11. Remove harness connector (13) from connector (14) on bulkhead.
057700-3