TM-9-2350-261-20-3

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 3 OF 4

TM-9-2350-261-20-3 - Page 602 of 932

TM 9-2350-261-20-3

REPLACE SMOKE GRENADE LAUNCHER WIRING HARNESS (M113A2,

M1059, AND M901A1 ONLY) — Continued

0577 00

REMOVAL

1.

Disconnect circuit 7 lead (1) and circuit 799 lead (2) from inside carrier.

2.

Remove locknut (3), lockwasher (4), and washer (5) from bushing (6) and wiring harness (7). Discard locknut and

lockwasher.

3.

Remove coupling nut (8), spring washer (9), packing retainer (10), end seal plug (11), and rubber bushing (12) from

bushing (6).

4.

Remove locknut (13), lockwasher (14), washer (15), and washer insulator (16) from bushing (6). Discard locknut and

lockwasher.

5.

Remove harness (7) from hull.

6.

Remove cover (17) from connector (18).

7.

Repeat Steps 1 - 6 for opposite side of carrier.

0577 00-2