TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 333 of 785

TM 9-2350-261-34

REPAIR CARGO HATCH HINGE (M113A2, M1059, AND M901A1 ONLY) — Continued

0044 00

4.

Remove rubber seal (1) from hinge edge of hatch (2).

ASSEMBLY

NOTE

All weld joints should be metal to metal fit. In no case should weld gap exceed 3/32 inch or one

half the thickness of thinner member, whichever is less.

1.

Clamp or tack weld new hinge (3) or (4) on hatch (2).

2.

Make sure hinges are aligned and spaced as shown.

0044 00-2