TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 330 of 785

TM 9-2350-261-34

REPLACE/REPAIR DRIVER’S LEVEL INDICATOR (M901A1 ONLY) — Continued

0043 00

NOTE

Make sure tags are removed from leads before installing.

5.

Solder three tagged electrical leads (4) on indicator switch (5) on indicator bracket (3)

6.

Install driver’s level indicator bracket assembly (3) on bulkhead with four new lockwashers (2) and screws (1).

ADJUSTMENT

1.

Set up clinometer on top deck to the right of turret, and adjust to read side-to-side tilt.

2.

Note the reading on the clinometer.

3.

Loosen two adjustment screws (20) on driver’s level indicator (21). Adjust level indicator to read the same as the

clinometer.

4.

Tighten adjustment screws (20) then recheck driver’s level indicator (21) with clinometer.

END OF TASK

0043 00-3/4 blank