TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34

  TM-9-2350-261-34 - Page 400 of 785

INSTALL PERSONNEL HEATER KIT (M1064 ONLY) — Continued
42. Remove two screws (1) and control box (2) from control box case (3).
43. Remove two screws, nuts, and washers supplied with control box case (3). Discard screws, nuts, and washers.
44. Secure control box case (3) to two weldnuts (4) with two lockwashers (5) and screws (6).
45. Secure control box (2) to control box case (3) with two screws (1).
46. Clean small area on transverse beam next to control box (2) and apply warning decal (see your -20).
47. Thread personnel heater wiring harness (1) through transverse beam from driver’s compartment into personnel
compartment.
48. Connect wiring harness (1) to personnel heater (2).
005600-9
0056 00
TM 9-2350-261-34


Back to Top