TM 9-2350-261-34
INSTALL PERSONNEL HEATER KIT (M113A2 AND M1059 ONLY) — Continued
0055 00
FOLLOW-THROUGH STEPS
1.
Fill fuel compartment (see your -10).
2.
Open fuel shutoff cock and check for leaks (see your -10).
3.
Bleed air from heater fuel lines (see your -20).
4.
Connect battery negative lead (see your -20).
5.
Start personnel heater, and check personnel heater installation for proper operation and leaks (see your -10).
6.
Turn personnel heater OFF (see your -10).
7.
Install power plant rear access panel (see your -20).
8.
Install rear floor plate (see your -20).
9.
Raise and lock ramp (see your -10).
10. Stop engine (see your -10).
END OF TASK
0055 00-14