TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 382 of 785

TM 9-2350-261-34

INSTALL PERSONNEL HEATER KIT (M113A2 AND M1059 ONLY) — Continued

0055 00

17. Secure plenum (1) to heater (2) with four lockwashers (3) and screws (4).

NOTE

Four nuts and screws were previously removed and retained. However, the screw that secures

strap is supplied in the personnel heater kit.

18. Secure two saddles (5) to power plant bulkhead with four retained screws (6), three lockwashers (7), ground strap (8)

and four retained nuts (9).

19. Install two clamps (10) in two saddles (5).

20. Position clamp (11) on heater intake pipe (12) and place clamp (13) on heater exhaust pipe (14). Do not tighten.

005500-5