INSTALL PERSONNEL HEATER KIT (M113A2 AND M1059 ONLY) — Continued
5.
Remove four nuts (1), screws (2), cover (3) and gasket (4) from engine compartment bulkhead. Retain four nuts.
Discard screws, cover, and gasket.
6.
Remove two nuts (5), screws (6), retainer (7), cover (8), and gasket (9) from engine compartment bulkhead. Discard
nuts, screws, retainer, cover, and gasket.
7.
Removeanddiscardcradleclip(1), move battery lead (2) aside.
8.
Remove screw (3) and cradle (4) from weldnut (5). Discard screw and cradle.
005500-3
0055 00
TM 9-2350-261-34