TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34

  TM-9-2350-261-34 - Page 632 of 785

REPAIR POWER CONTROL ENCLOSURE, RIGHT PANEL (M1068 ONLY) — Continued
15. Remove all wiring from terminal blocks (6) by loosening all set screws. Remove four screws (7), locknuts (8), eight
washers (9), and two terminal blocks (6) from enclosure (5). Discard locknuts.
ASSEMBLY
008300-5
ASSEMBLY
1.
Install two terminal blocks (6), four screws (7), new locknuts (8), and eight washers (9) on enclosure (5). Use wiring
diagram (page 0083 00-9). Install all wiring to terminal blocks and secure all set screws.
0083 00
TM 9-2350-261-34


Back to Top