TM 9-2350-277-20-1
MSD/ICE TEST 70 STARTER SOLENOID VOLTAGE DIAGNOSTIC
TROUBLESHOOTING — Continued
0150 00
Y
1.
Turn MASTER SWITCH OFF. See TM 9-2350-277-10.
2.
Set up Test 91. See TM 9-6625-2301-14&P.
3.
Remove nut (1) and harness 12354672 circuit 775 terminal
end E3 (2) from solenoid positive terminal (3).
4.
Ground terminal E3 to starter ground stud (4).
5.
Remove plug W1 P2 (5) from MSD/ICE distribution
box jack J2 (6).
6.
Measure resistance between MSD/ICE distribution box
jack J2 (6), pins S (7) and M (8).
7.
Does MSD read more than 0 ohms?
YN
1.
Faulty W1 cable. Beyond unit
maintenance repair.
2.
Notify supervisor.
015000-2
Change 5