TM-9-2350-277-20-2
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6
TM-9-2350-277-20-2 - Page 650 of 783
TM 9-2350-277-20-2
REPLACE FAN AND GENERATOR VARIABLE SPEED FAN DRIVE (OLD CONFIGURATION)
— Continued
0249 00
INSTALLATION
1.
Install three elbows (7), (8), and (9) and new packings (10), (11), and (12) on drive assembly (4).
2.
Install drive assembly (4) on engine. Secure with six screws (5) and washers (6). TIGHTEN SCREWS TO 32-34 LB-FT
(43-46 N
M) TORQUE.
3.
Connect three hoses (1), (2), and (3) to drive assembly (4).
FOLLOW-THROUGH STEPS
1.
Install fan drive belt (WP 0243 00).
2.
Adjust fan drive belt (WP 0242 00).
3.
Install generator drive belt (WP 0253 00).
4.
Adjust generator drive belt (WP 0252 00).
5.
Install power plant rear access panels (see your -10).
END OF TASK
0249 00-3/4 blank
Change 2
Back to Top
