TM-9-2350-277-20-2
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6
TM-9-2350-277-20-2 - Page 657 of 783
TM 9-2350-277-20-2
REPLACE HOSES FROM THERMOSTAT TO VARIABLE SPEED FAN DRIVE (OLD
CONFIGURATION) — Continued
0250 00
3.
Remove pressure hose (3) from elbow (6) on variable speed fan drive (4).
4.
Remove elbow (5) and packing (7) from variable speed fan drive (4). Discard packing.
5.
Remove elbow (6) and packing (8) from variable speed fan drive (4). Discard packing.
0250 00-2
Change 2
REMOVAL
1.
Remove strap (1) securing hoses (2) and (3) from variable speed fan drive (4). Discard strap.
NOTE
Install covers on disconnected hydraulic lines, tubes, valves and components during
maintenance. Use tape, cloth, cardboard, or any appropriate material to prevent damage to
components or accidental hydraulic fluid spills.
2.
Remove lube port hose (2) from elbow (5) on variable speed fan drive (4).
Back to Top
