TM 9-2350-277-20-3
REPLACE BATTERIES AND RETAINERS (M1064A3 ONLY) — Continued
0349 00
NOTE
Procedures are the same for removing left and right side. Access is different.
For right side, Remove Battery Box Cover/Seat See your -10
For left side, Open Battery Drawer See your -10
1.
Remove bolt (1), washer (2), and clamp (3) from two retainers (4).
2.
Remove two nuts (5), washers (6), and retainers (4) from two hooks (7). Remove hooks from frame (8).
0349 00-2
Do not start carriers while batteries are disconnected. Starting engine with outside power while
batteries are disconnected will damage electrical components in the regulator.
N
REMOVAL
C
O
A
I
UT
Change 1