TM-9-2350-277-20-3

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6

TM-9-2350-277-20-3 - Page 403 of 941

TM 9-2350-277-20-3

REPLACE BATTERIES AND RETAINERS (M1064A3 ONLY) — Continued

0349 00

INSTALLATION

WARNING

Battery is heavy and can cause back injury if handled improperly. Be sure to have helper assist

to install battery. Battery weighs about 75 lb (34 kg).

CAUTION

Place batteries with positive (+) and negative (-) terminals as shown in diagram. Damage to

components will occur if batteries are hooked up wrong.

1.

Place batteries (1) in battery box (2).

2.

Place hooks (3) in battery frame (4).

3.

Place two retainers (5) on two hooks (3). Secure with two washers (6) and nuts (7).

4.

Place clamp (8) on two retainers (5). Secure with washer (9) and bolt (10).

FOLLOW-THROUGH STEPS

1.

Install terminal lugs and connect battery leads (left side) (WP 0343 00) and install terminal lugs and connect battery

leads (right side) (WP 0343 00).

2.

Turn MASTER SWITCH ON to check that battery is installed correctly. MASTER SWITCH ON light should come on

(see your -10).

3.

Start engine (see your -10).

4.

Raise and lock ramp (see your -10).

5.

Stop engine (see your -10).

END OF TASK

0349 00-4

Change 1