TM-9-2350-277-20-3

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6

TM-9-2350-277-20-3 - Page 584 of 941

REPLACE REAR MAIN WIRING HARNESS (M1068A3 ONLY) — Continued

70. Remove two nuts (1), mounts (2) and (3), flat washers (4), and screws (5) that secure instrument panel (6) to two struts

(7).

71. Support panel (6). Remove two screws (8), flat washers (9), lockwasher (10), and ground lead (11) from two mounts

(12) and upper support (13). Discard lockwasher.

72. Support panel (6) on two struts (7) to gain access to rear of panel.

73. Disconnect circuit 28 lead (14) from fuel gauge.

74. Disconnect circuit 451B lead (15) from rear bilge pump ON indicator light.

75. Disconnect circuit 38 lead (16) from instrument panel wiring harness.

76. Disconnect circuit 450 lead (17), circuit 450B lead (18), and circuit 451A lead (19) from bilge pump switch.

77. Disconnect circuit 21 lead (20), circuit 22 lead (21), circuit 23 lead (22), and circuit 24 lead (23) from front main wiring

harness.

0365 00-13

Change 4

TM 9-2350-277-20-3