TM-9-2350-277-20-3

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6

TM-9-2350-277-20-3 - Page 592 of 941

REPLACE REAR MAIN WIRING HARNESS (M1068A3 ONLY) — Continued

34. Install circuit 415 lead (1) and circuit 59 lead (2) in clamp (3). Secure clamp on weldnut (5) with new lockwasher

(4) and screw (6).

35. If NBC unit is installed, connect circuit 415 lead (1) to NBC unit.

36. Connect circuit 59 lead (2) to blower (7).

37. Install three circuit 48 connectors (8) on bracket (9). Secure with 12 screws (10) and new locknuts (11).

38. Install clamp (12) on rear main wiring harness (17).

39. Install clamp (12) with rear main wiring harness (17), circuit 48C capacitor (13), and new lockwasher (14) on weldnut

(15). Secure with new lockwasher (16) and screw (23).

40. Install three ground leads (19) and new lockwashers (20) on weldnut (21). Secure with screw (22).

0365 00-21

Change 4

0365 00

TM 9-2350-277-20-3