REPLACE REAR MAIN WIRING HARNESS (M1068A3 ONLY) — Continued
78. Remove screw (1), nut (2), circuit 6 lead (3), circuit 48B lead (4), and W4 cable (5) from battery terminal (6).
79. Remove circuit 48B lead (4), circuit 6 lead (3), and W4 cable (5) from battery box (8).
80. Remove three screws (9), lockwashers (10), and clamps (11) from circuit 48B lead (4). Discard lockwashers.
81. Disconnect circuit 38 lead (16), circuit 38B lead (12), and circuit 38C lead (13) from ramp door switch (14).
82. Remove rear main wiring harness (15) from carrier.
INSPECT AND REPAIR
1.
Inspect for damaged leads, connectors, and terminals. Repair as needed (WP 0382 00).
0365 00-14
Change 4
0365 00
TM 9-2350-277-20-3