TM-9-2350-277-20-3

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6

TM-9-2350-277-20-3 - Page 587 of 941

REPLACE REAR MAIN WIRING HARNESS (M1068A3 ONLY) — Continued

5.

Connect circuit 21 lead (1), circuit 22 lead (2), circuit 23 lead (3), and circuit 24 lead (4) to front main wiring harness.

6.

Connect circuit 450 lead (5), circuit 450B lead (6), and circuit 451A lead (7) to bilge pump switch.

7.

Connect circuit 38 lead (8) to instrument panel wiring harness.

8.

Connect circuit 451B lead (9) to rear bilge pump ON indicator light.

9.

Connect circuit 28 lead (10) to fuel gauge.

10. Support instrument panel (11) on two struts (12).

11. Install ground lead (13), new lockwasher (14), and instrument panel (11) with two mounts (16) on upper support (15).

Secure with two screws (17) and flat washers (18).

12. Install panel (11) on two struts (12). Secure with two nuts (19), mounts (20) and (21), flat washers (22), and screws (23).

0365 00-16

Change 4

0365 00

TM 9-2350-277-20-3