TM-9-2350-277-20-3

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6

TM-9-2350-277-20-3 - Page 591 of 941

REPLACE REAR MAIN WIRING HARNESS (M1068A3 ONLY) — Continued

28. If NBC unit is installed, connect circuit 415 lead (1) to NBC unit.

29. Connect circuit 402 lead (2) to personnel heater wiring harness.

30. Connect circuit 400 lead (3) to personnel heater control box.

31. Install six clamps (4) on circuit 48 lead (5). Secure clamps to weldnuts (6) with screws (7).

32. Install two new lockwashers (8), circuit 48 capacitor (9), and ground lead (10) on weldnut (11). Secure with screw (12).

33. Install circuit 48 connector (13) on bracket (14). Secure with four screws (15) and nuts (16).

0365 00-20

Change 4

0365 00

TM 9-2350-277-20-3