TM-9-2350-277-20-3

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6

TM-9-2350-277-20-3 - Page 593 of 941

TM 9-2350-277-20-3

REPLACE REAR MAIN WIRING HARNESS (M1068A3 ONLY) — Continued

0365 00

41. Install circuit 48A lead (11) in two clamps (8). Secure clamps on two weldnuts (9) with two screws (6) and new

lockwasherss (7).

42. Install circuit 48A connector (11) on bracket (4). Secure with four screws (5) and new locknuts (10).

43. Connect circuit 38B lead (23) to lead (3), and lead (3) to front blackout light (2).

44. Connect circuit 38C lead (21) to lead (3), and lead (3) to left dome light (1).

45. Install rear main wiring harness (15) on eight weldnuts (18). Secure with eight clamps (14), new lockwashers (12), and

screws (13).

46. Install two clamps (17) on rear main wiring harness (15). Secure clamps on two weldnuts (18) with screws (16).

47. Install clamp (22), new lockwashers (20), and screw (19) on two leads (3).

0365 00-22

Change 4