TM-9-2350-277-20-4

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6

TM-9-2350-277-20-4 - Page 137 of 861

TM 9-2350-277-20-4

REPLACE STEERING WHEEL LINKAGE — Continued

0430 00

4.

Install bearing (7) with nut (8) in mount (9) on bulkhead.

5.

T

ightennut(8)onbearing(7)

.

6.

Install shaft (10) into bearing (7)

7.

Install other end of shaft (10) into bearing (11).

8.

Secure bearing (11) to bulkhead with two washers (12), new lockwashers (13), and screws (14).

9.

Install key (15) on shaft (10).

10. Install arm (16) on shaft (10). Align arm with link (17). Secure link on arm with screw (18), washer (19), and new

locknut (20). Secure arm (16) with screw (21) and new locknut (22). TORQUE LOCKNUT TO 17-20 LB-FT (23-27

N·m). Use torque wrench.

11. Install washer (23) and new locknut (24) on end of shaft (10).

0430 00-8

Change 5