TM-9-2350-277-20-4

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6

TM-9-2350-277-20-4 - Page 143 of 861

TM 9-2350-277-20-4

REPLACE STEERING SUPPORT, BRACKETS, AND SHAFT — Continued

0432 00

NOTE

There are two ways that the lanyard (11) can be secured to the housing shown below. Both

locations use the same screw, washer, and locknut.

3.

Remove screw (6), washer (13), and nut (12) that secure lanyard (11) to bracket (15). Remove pin (10) with lanyard.

4.

Remove two socket head screws (14), washers (8), and locknuts (7) that secure support (9) to bracket (15). Remove

support from carrier. Discard locknuts.

5.

Remove three screws (4), washers (2), clamps (3), and nuts (1) that secure cable (5) to support (9) and bracket (15).

6.

Pull cable (5) and grommet (16) from bracket (15). Discard grommet.

0432 00-2

Change 4