TM-9-2350-277-20-4

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6

TM-9-2350-277-20-4 - Page 149 of 861

TM 9-2350-277-20-4

REPLACE STEERING SUPPORT, BRACKETS, AND SHAFT — Continued

0432 00

18. Install cable (5) and new grommet (16) in bracket (15). Secure cable to bracket with screw (4), clamp (3), washer (2),

and nut (1).

19. Install cable (5) in support (9) and secure with two screws (4), clamps (3), washers (2), and nuts (1).

20. Guide shaft through support (9), and install support (9) on bracket (15). Secure with two screws (14), washers (8), and

new locknuts (7).

21. Install pin (10) through bracket (15) and support (9). Secure support in the upper position on the bracket.

NOTE

There are two ways that the lanyard (11) can be secured to the housing shown below. Both

locations use the same screw, washer, and locknut.

22. Install lanyard (11) on bracket (15) and secure with screw (6), washer (13), and nut (12).

0432 00-8

Change 4