TM 9-2350-277-20-6
REPAIR POWER CONTROL ENCLOSURE FACEPLATE AND
BRACKET (M1068A3 ONLY)
0828 00
THIS WORK PACKAGE COVERS:
Disassembly (page 0828 00-1).
Assembly (page 0828 00-7).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Primer (WP 0928 00, Item 45)
Sealing Compound (WP 0928 00, Item 48)
Locknut (4)
Locknut (4)
Lockwasher (4)
Lockwasher (4)
Lockwasher (10)
Strap (AR)
Personnel Required
Power-Generation Equipment Repairer 52D10
References
WP 0338 00
Equipment Condition
Engine stopped (TM 9-2350-277-10)
Carrier blocked (TM 9-2350-277-10)
All external power disconnected
(TM 11-7010-256-12&P)
Battery ground lead disconnected (WP 0338 00)
DISASSEMBLY
1.
Remove two screws (5), lockwashers (4), and bracket (3) from enclosure (2). Discard lockwashers.
2.
Remove ten screws (10), lockwashers (6), and faceplate assembly (9) from enclosure (2). Lower faceplate (9). Discard
lockwashers.
3.
Remove straps (1) from leads as required. Discard straps.
4.
Remove four screws (7) and washers (6) from faceplate hinge (8).
082800-1
Change 5