TM-9-2350-277-20-6
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 6 OF 6
TM-9-2350-277-20-6 - Page 77 of 487
TM 9-2350-277-20-6
REPAIR POWER CONTROL ENCLOSURE FACEPLATE AND BRACKET
(M1068A3 ONLY) — Continued
0828 00
NOTE
Tag all leads before removal.
There are 13 circuit breakers alike. All circuit breakers are removed in the same way. The
art work shows the removal of only one circuit breaker. Use wiring diagram in the back of
the manual.
NOTE
Unless otherwise noted retain all hardware for use during reinstallation.
5.
Remove nut (16) and safety cover (17) from terminal 1 of circuit breaker CB1 (11). Unwrap velcro strap (18) from
around local wiring.
6.
Remove two nuts (15) and lockwashers (14) from circuit breaker CB1 (11).
7.
Remove circuit 7A lead (13) from terminal 1 of circuit breaker CB1 (11).
8.
Remove circuits 9A, 9E, and 9D leads (12) from terminal 2 of circuit breaker CB1 (11).
9.
Remove two screws (19), lockwashers (20), and circuit breaker CB1 (11) from faceplate (9). Discard lockwashers.
0828 00-2
Change 5
Back to Top
