TM 9-2350-311-20-1
Drop limits across a connection should be less than 0.1 V and
drop across a cable should be less than 0.2 V.
Check voltage drop across solenoid, all cables, and
connections in positive side of starter circuit.
NOT E
After completing repair, rerun GO CHAIN tests to verify
problem has been fixed and that no other problems exist.
Start at GO 2 (Figure 2, sheet 8) if VTM is already connected.
Otherwise start at GO 1 (Figure 2, sheet 1).
Figure 3, Sheet 9 of 36
I-35
NOT E