TM 9–2350–311–20–2
Change 2
14–32.3
11
Adjust the length of wire rope (6) between inside of snap hook (2) and inside of thimble (7) to 27.75
±
0.75
inches (704.85
±
19.05 mm).
12
Mark where wire rope (6) starts around thimble (7).
13
Remove wire rope (6) from thimble (7).
14
Measure from mark made in step 12 out approximately 6 inches and cut off excess wire rope.
15
Strip cover from mark to end of wire rope (6).
16
Reinsert stripped end of wire rope (6) around thimble (11).
6
11
6.00 in.
27.5
±
0.75 in.
6
7
2