TM 9–2350–311–20–2
14–27
b.
Disassembly
1
Remove four sleeve bearings (7) from left bustle door (6) and discard.
2
Remove two cap screws (8), two lockwashers (9), locking bar slide (10), plate spacer (11), and shim(s) (12)
from left bustle door (6). Discard lockwashers and shims.
3
Remove two cap screws (13), two lockwashers (14), catch strike (15), wear plate (16), and shim(s) (17) from
left bustle door (6). Discard lockwashers and shims.
4
Remove self-locking nut (18), thrust washer bearing (19), clevis assembly (20), and thrust washer bearing
(21) from left bustle door (6). Discard self-locking nut.
5
Repeat steps 1 through 4 for right bustle door (4).
6
Remove self-locking nut (22), flat washer (23), flat washer (24), rim latch (25), and flat washer (26) from left
bustle door (6) only. Discard self-locking nut.
20
7
19
18
21
17
16
15
14
13
12
11
10
9
8
26
25
24
23
22
6