TM-9-2350-311-34-1

HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS: HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-1 - Page 192 of 352

TM 9-2350-311-34-1

7-11 BULKHEAD-TO-DRIVER’S INSTRUMENT PANEL WIRING HARNESS — CONTINUED

d. Installation- Continued

NOTE

Install screws from inside hull on rear bulkhead.

5 Position left and right taillight assemblies (43 and 44) on hull and install two screws (40), two flat washers (41),

and two new Iookwashers (42).

NOTE

For quick guide to wire connector locations see paragraphs 7-2 and 7-3.

6 Connect seven connectors (29,8,9, 10,15,20, and 24) to driver’s instrument panel (39).

NOTE

Connectors are located in well below driver’s instrument panel and circuit breakers.

7 Connect connector (23) to circuit breaker (38).

7-58