TM-9-2350-311-34-1

HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS: HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-1 - Page 207 of 352

TM 9-2350-311-34-1

b. Disassembly

Disassemble wiring harness leads (TM 9-2350-311-20-1).

c. Assembly

Assemble wiring harness leads (TM 9-2350-311-20-1).

d. installation

1 Install ground lead (27), two washers (26), and two screws (25).

2 Install wiring harness, lead (10), washer (24), and screw (23).

3 Install 11 plastic straps (20), 11 screws (21), and 11 washers (22).

4 Install two plastic straps (17), four washers (1 9), and four screws (18) to secure power lead.

5 Connect connector (1) to driver’s compartment bulkhead.

6 Install lead (3), washer (14), screw (13), and nut (15) to slip ring segment board (16).

7 Connect connector (2) at accessory control box (1 2).

7-71