TM-9-2350-311-34-1

HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS: HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-1 - Page 211 of 352

TM 9-2350-311-34-1

b.

c.

4

5

6

7

8

9

Disconnect connector (2) at accessory control box (13).

Remove screw (14), washer (15), and nut (16) from slip ring segment board (17) and release lead (3).

Disconnect connector (1) at driver’s compartment bulkhead.

Remove two plastic straps (18), four screws (19), four Iockwashers (20), and four washers (21). Release

power lead and reinstall straps, washers, Iockwashers, and screws. Discard Iockwashers.

Remove 13 plastic straps (22), 13 screws (23), 13 Iockwashers (24), and 13 washers (25). Release power lead

and reinstall straps, washers, Iockwashers, and screws. Discard lockwashers.

Remove wiring harness from hull.

Disassembly

Disassemble wiring harness leads (TM 9-2350-311-20-1).

Assembly

Assemble wiring harness leads (TM 9-2350-311-20-1).

7-75