TM-9-2350-311-34-1

HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS: HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-1 - Page 217 of 352

TM 9-2350-311-34-1

5 Unsolder six electrical leads (33) from six power diode assembly terminals (34 and 35) (TB SIG 222).

6 Unsolder electrical lead C-5 to CR-6 (36) at power diode assembly (37) (TB SIG 222).

7 Unsolder electrical lead C-3 to CR-5 (38) at power diode assembly (39) (TB SIG 222).

8 Unsolder electrical lead C-1 to CR-4 (40) at power diode assembly (41) (TB SIG 222).

9 Remove two screws (42), two Iockwashers (43), and two flat washers (44) and release two leads C-7 to E-2

and C-1 to E-1 (45 and 46). Discard Iockwashers.

7-81