TM-9-2350-311-34-1

HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS: HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994
TM-9-2350-311-34-1

  TM-9-2350-311-34-1 - Page 281 of 352

TM 9-2350-311-34-1
75 Place holddown strip (172) for intake grille tarpaulin (173) on grille to serve as template for screw holes. Mark
and remove strip. Drill and tap six 5/1 6-24 UNF-28 holes.
76 Locate 10 footman’s loop-type fasteners (1 74) and weld into place (TM 9-237).
77 Install intake grille tarpaulin (173) with straps (175) and webbing down. Install six 5/16-24 by 3/4-in. screws
(176) and flat washer (177) in holddown strip (172).
78 Secure intake grille tarpaulin (173) by installing straps (175) to 10 loop-type fasteners (174).
10-21


Back to Top