TM-9-2350-311-34-1

HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS: HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-1 - Page 274 of 352

TM 9-2350-311-34-1

10-1 WINTERIZATION KIT INSTALLATION — CONTINUED

40

41

42

43

44

a. Installation — Continued

Remove engine access door in driver’s compartment (TM 9-2350-311-20-1). Disconnect fuel main supply hose

at quick-disconnect coupling (106) on primary fuel filter (107).

Remove plug (108) on primary fuel filter top inlet opening and install elbow (109).

Place coolant heater fuel filter-to-primary fuel filter hose (110) along left side of powerplant compartment and

install to primary fuel filter inlet elbow (109).

Use screws, washers, and strap material to secure fuel hose (1 10) at three places on powerplant.

Install elbow (111) at heater fuel control valve (112) inlet opening. Connect fuel pump-to-fuel control valve tube

(113) to control valve inlet elbow and install at heater fuel pump inlet opening (82).

10-14