TM-9-2350-311-34-2

CAB, ARMAMENT, SIGHTING AND FIRE CONTROL, ELEVATING AND TRAVERSING SYSTEMS AND ASSOCIATED COMPONENTS HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-2 - Page 130 of 552

TM 9-2350-311-34-2

CAB - CONTINUED

b. Installation

Use a lifting device with a capacity of at least 15,000 pounds (6804 kg) to avoid possible injury or

death. A lifting device with insufficient lifting capacity could break due to stress.

Personnel should wear steel-tipped safety shoes and safety glasses to avoid possible injury.

1

Attach four shackles (9) and turret lifting sling (10) to four cab lifting eyes (11) as shown.

2

Raise cab (8) slowly and position over hull (12).

NOTE

A guide rope may be used to aline race ring alining pins with alining holes on race ring.

3

Aline bolt holes (13) in cab (8) with race assembly (14). Aline alining hole (15) with race locating pin (16).

4

Lower cab (8) onto hull (12) slowly.

5

Detach four shackles (9) and remove turret lifting sling (10) from four cab lifting eyes (11).

3-4 Change 2