TM-9-2350-311-34-2

CAB, ARMAMENT, SIGHTING AND FIRE CONTROL, ELEVATING AND TRAVERSING SYSTEMS AND ASSOCIATED COMPONENTS HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-2 - Page 135 of 552

TM 9-2350-311-34-2

1

Remove 48 bolts (1) and 48 flat washers (2) from bottom of bearing/race ring assembly (3).

2

Install three eye bolts (4) in outer race (5) bolt holes at 120° intervals (every 16th hole) as shown.

3

Attach three of the four shackles (5.1) of the turret lifting sling (6) to three eye bolts (4). Secure the fourth leg

(6.1) of the lifting sling to it ’s companion leg to prevent damage or injury. Attach hoist (7) to turret lifting sling

as shown.

4

Lift bearing/race ring assembly (3) out of hull and position on wooden blocks as shown.

5

Detach hoist (7) and the three shackles (5.1) of the turret lifting sling (6). Remove three eye bolts (4).

Change 2 4-3