TM-9-2350-311-34-2

CAB, ARMAMENT, SIGHTING AND FIRE CONTROL, ELEVATING AND TRAVERSING SYSTEMS AND ASSOCIATED COMPONENTS HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-2 - Page 137 of 552

TM 9-2350-311-34-2

6

7

Attach three eye bolts (4) to inner race (10) at approximate 120° intervals (every 9th hole) as shown.

Attach three of the four shackles (5.1) of the turret lifting sling (6) to three eye bolts (4). Secure the fourth leg

(6.1) of the turret lifting sling to it ’s companion leg to prevent injury or damage. Attach hoist (7) to turret lifting

sling as shown. Lift inner race (10) out of bearing/race ring assembly (3). Position inner race on wooden

blocks.

8

9

Remove 106 race ring spacers (18) or 213 helical compression springs (19) from outer race (5). Discard

helical compression springs, if present.

Remove three plugs (20) from inner race (10).

Change 2 4-5