TM-9-2350-311-34-2

CAB, ARMAMENT, SIGHTING AND FIRE CONTROL, ELEVATING AND TRAVERSING SYSTEMS AND ASSOCIATED COMPONENTS HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-2 - Page 357 of 552

TM 9-2350-311-34-2

Adhesives can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To

avoid injury or death, keep away from open fire and use in well-ventilated area. If adhesive gets on

skin or clothing, wash immediately with soap and water.

21

Bond dust and moisture boot (8) to bracket and housing group (3) with adhesive.

22

Install headless straight pin (7) to bracket and housing group (3).

23

Assemble control valve body assembly (6) group to bracket and housing group (3) ensuring connecting link

(11) and electrical lead assembly (51) is routed through moisture boot (8) and secure with three new lock-

washers (5) and three cap screws (4).

24

Install new lockwasher (2) and cap screw (1) in lower rear corner of bracket and housing group (3).

Change 2 6-93