TM-9-2350-311-34-2

CAB, ARMAMENT, SIGHTING AND FIRE CONTROL, ELEVATING AND TRAVERSING SYSTEMS AND ASSOCIATED COMPONENTS HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-2 - Page 440 of 552

TM 9-2350-311-34-2

11-3 TRUNNION BRACKET

—

CONTINUED

a. Removal

—

Continued

NOTE

Retain shims unless new components are to be installed.

9

If necessary for replacement, remove lockwire (13) two cap screws (14) and shims (15 and 16) from trun-

nion bracket (2). Discard lockwire.

10

If necessary for replacement, remove lockwire (17), two cap screws (18), gun stop (19), and plate spacer

(20) from trunnion bracket (2). Discard lockwire.

b. Installation

1

If removed, install plate spacer (20), gun stop (19) two cap screws (18), and new lockwire (17) on trunnion

bracket (2).

2

If removed, install shim (16) and shim(s) (15) as required, two cap screws (14), and new lockwire (13) on

trunnion bracket (2).

11-10